Take your coil building to the next Level - Standswirl V3
The standing vortex is equipped with a plug-in screw system. Height adjustment from the middle of the pin 45-320 mm. The individual units can be exchanged and are locked with a screw nut. The magnet unit is equipped with six different magnet discs to adjust the pulling force. The two ball bearing units are each equipped with an Abec11 RS ball bearing.
x1 Vertebra body (with bar)
x1 Magnet plug-in unit with six different magnet discs
x1 Ball bearing Abec11 plug-in unit with a vertically rigid joint
x1 Ball bearing Abec11 plug-in unit with a movable joint