My First Vape

MY FIRST VAPE

So you’ve decided you want to vape – congratulations. Welcome to the wonderful world of Vaping.

SETTING UP YOUR VAPE FOR THE FIRST TIME

My first vape has just arrived and I’m ready to set it up. You will want to hit the fire button on the vape kit to see how it works….STOP!!! The most common mistake beginners make is to hit the button while the tank is empty. This will dry hit the coil and burn the cotton that is inside, which will lead to the coil being ruined and give a really bad taste of your E Liquid that you spent so long choosing. If you follow our step by step set up guide below, you will be vaping in no time!

STEP 1

Remove your device and contents from the box and familiarise yourself with your vape kit or pod. Remove the pre-installed coil from your vape tank and drip a drop or two of e-liquid directly onto your coil through the wicking holes. This is called priming your coil and will avoid burning your new coil.

STEP 2

Determine if your e liquid tank is a top fill or a bottom fill. Also, if it has a air port close this before filling. Open the fill cap, Slowly fill the tank with your E liquid. Do not overfill. Some tanks will have a fill line. 

Tank                                               Pod

    

STEP 3

IMPORTANT Let your tank sit for 5 minutes before you first use it.….this allows the E liquid to soak right through the coil. The organic cotton inside your coil soaks in the ejuice.

STEP 4

Is your vape a fixed device or a variable wattage device. If your vape has NO display screen and NO controls on the side this is a fixed wattage device -GO to Step 6. If your device has a display screen and controls on the side you have a variable wattage device - Go to Step 5.

STEP 5

Before using the vape for the first time you want to make sure you have the correct settings to power the coil inside the tank. For Example: Your coil will have a recommended wattage. To use the device correctly you will set your device to output of the lowest recommended setting for the coil you have installed. Once you have started vaping you can up the watts BUT always stay within the coil recommended watts.

STEP 6

So your ready to go! Lets try your new vape out for the first time; put your mouth on the drip tip / mouthpiece, and begin to draw from the mouthpiece and hold down the fire button at the same time. To begin with you can take a 1-2 second draw. Then you can take longer draws as you become more comfortable with your first vape.

 

MAINTAINING YOUR COIL AND PROLONGING THE COILS LIFESPAN.

Always have e-juice inside your tank. Never let your tank dry out as this can burn your coil and ruin or reduce the life and length of use on the coil. Keep topping up your tank when you see it get to below half on your tank, so always make sure to have a bottle of e-juice handy with you when you are out and about.

You’ll know that it’s time to change your coils when the amount and taste of the vapor isn’t quite up to par. Depending on the type of atomizer you’re using, changing the coil is a straightforward affair. You simply remove the base of the atomizer, take out the coil, and then screw in the new one.